Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > General Information > Electrical / Radios

Electrical / Radios Discussion of electrical systems and accessories.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-03-17
Seigried Seigried is offline
Valued Member
Join Date: Apr 2016
Location: brisbane
Posts: 482
Default Gen 4 battery tray fix

Here is how if fixed my broken tray, you need a tray and -

disconnect the battery and remove
eye protection

The whole job took about 2 hours over 2 week days + time for the paint to dry. If you choose to not repaint the metal tray then 2 hours.

1- photo 1 & 2 Disconnect and remove battery, various tools are required as well as a suitably sized rivets and a battery tray
2-photo 3 the unmodified tray is a good fit but does not sit flat.
3-photo 4 & 5 using my dremmel style tool I marked out and cut some holes in my tray to allow access to the factory tray bolts.
4-photo 6, 7 & 8- on one side the little side tabs need to be cut out to allow the tray to sit flush
5-photo 9 - The ends of the factory tray also need to be cut to allow the tray to sit flush
6-photo 10 - tray sitting flush
7-photo 11 & 12 - tray showing rivet locations underneath the factory tray and the new metal rivets done
8-photo 13 - final product bolted back in place

If i did this again I would make some of the holes in the metal tray larger making it easier to access and tighten the factory tray bolts.
Attached Images
File Type: jpg 01-tools.jpg (152.7 KB, 179 views)
File Type: jpg 02-rivets.jpg (137.2 KB, 180 views)
File Type: jpg 03-unmodified tray.jpg (133.7 KB, 194 views)
File Type: jpg 04-modified tray.jpg (98.2 KB, 182 views)
File Type: jpg 05-mod tray inplace.jpg (83.4 KB, 177 views)
File Type: jpg 06-tab to cut.jpg (91.0 KB, 173 views)
File Type: jpg 07-cut tabs.jpg (96.0 KB, 178 views)
File Type: jpg 08-cut tabs 2.jpg (126.1 KB, 178 views)
File Type: jpg 09-trim at bottle.jpg (69.0 KB, 167 views)
File Type: jpg 010-test fit.jpg (73.7 KB, 170 views)
File Type: jpg 011-rivits under tray.jpg (154.5 KB, 178 views)
File Type: jpg 012-rivits in place.jpg (127.9 KB, 174 views)
File Type: jpg 013-tray in place.jpg (116.5 KB, 174 views)

Last edited by Seigried; 12-03-17 at 07:46 PM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Battery tray tie down fix and modifying the tray for a bigger battery nicho Generation 4-3 Pajero 9 27-10-16 03:08 PM
Offroad downunder battery tray and Battery size yarc Generation 3 Pajero 6 04-12-13 05:35 PM
ARB Dual Battery Tray & AUX Battery Size Hookedon4wding Generation 4-1 Pajero 7 16-10-11 04:23 PM
Home made Battery Tray for Duel Battery setup gjh1967 Generation 3 Pajero 14 17-09-11 01:02 AM
DIY dual battery: Tray modding and reusing factory battery formertoyotaman Generation 4-2 Pajero 15 29-07-11 02:18 PM

All times are GMT +10. The time now is 04:02 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.