Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 3 Pajero

Generation 3 Pajero NM - NP Models 2000 - 2006

Thread Tools Display Modes
Old 16-09-19
Gena Gena is offline
Junior Member
Join Date: Sep 2013
Location: Melbourne
Posts: 1
Talking Cam Angle Sensor passenger side removal

I have replaced my Cam sensor O ring today.Simple tools will make the job easy.The thump ratchet tool was a big help.The sensor has one 10mm bolt.
My O ring was rock hard and was leaking.
You do not have to remove the intake top part to do this job.
It should take you no more than an hour and half to do this job.Make sure you create room where your hand and arm needs to move.

I removed the sensor wire bracket on top and moved the engine breather rubber pipe to one side.Gives you much more room.

I had to lie on top of the engine to do the job.Use old blankets or something soft to protect the engine when lying on top.

Hopefully the photos will show what I did and explain what to do.

I used a standard O ring that fitted the sensor.I also used RED Rubber Grease to lubricate the O ring.

Up to you if you want to use original O ring part.Believe the part number is MD623055.
Attached Images
File Type: jpg 10mm bolt.jpg (61.0 KB, 28 views)
File Type: jpg Cam Sensor.jpg (128.8 KB, 25 views)
File Type: jpg Bracket removed.jpg (106.8 KB, 26 views)
File Type: jpg Breather Pipe Removed.jpg (119.5 KB, 24 views)
File Type: jpg Tool.jpg (128.0 KB, 26 views)
File Type: jpg Cam Sensor drawing.jpg (20.2 KB, 26 views)
Reply With Quote
Old 18-09-19
Roler Roler is offline
Junior Member
Join Date: Apr 2018
Location: Brisbane
Posts: 49

Was it leaking that bad? I don't think I ever even checked there...
2006 NP Exceed 3.8ltr V6 auto 219K
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Crank angle sensor savage pajero Generation 3 Pajero 1 10-12-19 02:26 PM
Cam angle sensor zacc Generation 3 Pajero 5 16-10-18 07:49 PM
Yaw Sensor, G-Sensor and Steering Angle Sensor Caused Breakdown Cojo Generation 4-1 Pajero 0 01-07-15 12:40 AM
crank angle sensor or cam angle sensor Pajerobob Generation 3 Pajero 1 04-02-13 07:30 PM
Crank Angle Sensor justin580 Generation 2 Pajero 0 04-05-10 01:09 PM

All times are GMT +10. The time now is 01:49 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.