I am looking for the best locations to get accessories 12v for daytime running lights in the engine bay, closer to the front the better.
Below Nav Bar
Collapse
Engine bay 12v accessories locations
Collapse
X
-
Grab a test light and check for ignition switched sources.
Or there are unused slots in the fuse/relay block in the cab you can use as a trigger for the relay. Then run the trigger wire through the firewall to connect to the relay under the bonnet.PC Challenger. TJM bar and winch. Dual battery with Redarc dc-dc, Redarc trailer brake controller. USB outlets everywhere, Uniden UH5060 UHF, $0.45 EGR mod. Lovells springs and Bilstein shocks For 50mm lift. LED spotties. MM 4X4 Automate. Airtec snorkel, Hancook dynapro, Bushskinz skid plates x3 + side steps.Torqit peddle thing. Torqit Power Module.
-
Matched content
Collapse
Comment