Below Nav Bar

Collapse

Door Trim Removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • asproclear
    Member
    • Apr 2010
    • 63
    • Australia

    Door Trim Removal

    I'm going to be fixing a problem with the passenger side window on my NH. I've removed all the screws I can see and haven't had much luck in removing the trim (I don't want to damage it if I can avoid it). Anyone here done thsi before? I've so far removed a screw on the door end, the two in the handle, and two little ones in the upper right-hand corner.
  • asproclear
    Member
    • Apr 2010
    • 63
    • Australia

    #2
    Okay, figured it out. the one screw I did not see is behind the door pull. Once you remove that, use a large screwdriver to pry the trim off the door, going all the way around the edge of the door.

    So in summary, there are a total of 5 screws to remove from the passenger side door. Two in the arm rest, two small ones in the upper right hand corner (these are obvious) and one small screw behind the door handle.
    Last edited by asproclear; 28-02-11, 08:35 AM.

    Comment

    • Gus
      Administrator
      • Mar 2008
      • 4074
      • Traralgon. Vic

      #3
      spose you could say thats fixed & saved a few "headaches"..
      VX 200 Series 4.5L Twin Turbo-Diesel V8 Landcruiser HERE
      NM Exceed 3.2 DID Auto Pajero. (SOLD) With a few Mods. HERE

      How to get Forum Decals

      Comment

      Matched content

      Collapse
      Working...
      X