Thread: NL Low Idle...
View Single Post
  #5  
Old 14-01-20
neilrsayers neilrsayers is offline
Member
 
Join Date: Dec 2013
Location: Dubbo
Posts: 59
Default

ecu reset seems to have done nothing... ive checked the old ISC and it had >400 ohms resistance between pins 2-1/3 and 5-4/6. I'll check the new one this afternoon if time allows, but it seems that its not working at all as there is no increased RPM when turning the A/C on. I assumed it was working when i did the ecu reset/idle relearn as it clicked as per many forum posts stated.

Does anyone have any voltages that i can check on the loom side of things to check for ECU/wiring faults? I've got a tactirx cable so i'll hopefully be able to get some sensor values to rule out any issues with TPS/coolant temp etc.
Reply With Quote