Hey All - long rambling first post ahead! New forum poster, and new (ish) Gen 1 Pajero owner! Picked up for peanuts, and hasn't been on the road since 2011, currently unregistered - but keen to work through a large list of jobs to get her back out on the road! 138000ks on the clock, and only one tiny bit of rust above the rear door. All in all, pretty good nick - starts and runs well except for a terrifying steering wobble at 80 km/h (tested on a private road!). It has the worlds most complicated looking 2.0 petrol - a 4G63BT Cyclone - why are there so many wires! - which I believe was an imported JDM only option - she still has the Automobile Assocation of Japan stickers on the back window! It feels strong for a 30 year old non-intercooled EFI turbo petrol, and I'm looking forward to breathing some new life into the body and the engine.
From what I've assessed the current job list is as follows:
Body
- New rims and tyres. Going to look for 265 75r16's, on either some sunnys or old style triton alloys.
- Steel bullbar and winch (should be getting one second hand this weekend)
- Full bush replacement front and back
- New springs and shocks
- Underguard paint and sound deaden
- Snorkel
- Full diff/gearbox/power steering/brake fluid change
- Diff/gearbox sandblast and repaint
- Brake caliper rebuild
- High mount diff/gearbox breathers
- Roof rack
- Rooftop tent
- Dual battery/12V electric system with dual voltage gauges, inverter, camping lights and air compressor
- UHF
- Remove rear seats
- Replace interior carpet and lay dynamat (or similar) through interior.
- Driveshaft boot replacement
- Gangster tint for the back windows
Engine
- Cam timing belt
- Get rid of the mechanical fan and go to 2x electric thermofans
- Fluid flush and change
- Aircon regas
- Fix heater blower
- New power steering pump (has a bent shaft - wtf??)
- New accessory belts
- New radiator hoses
Dream Mods
- Intercooler.
- 2.75" exhaust (for that sick JDM ricer rumble sound yo )
- Bigger camshaft
- Dyno tune
- OEM guard flares
- Replacing the 3 weird centre gauges with in style (matching-ish the main instruments) boost, oil pressure/temperature and water temperature
- Low coolant alarm
- Rear drawers/fridge slide
- Overhead console
- Gen 2 front caliper kit
- Repaint body
- Rock sliders with scrub bars to bullbar
- Interior cargo barrier
- Replace rear window seals
Its got some amazing features for a 1988 4x4; electric windows, power tailgate, cool gauges, two tone paint, huge trucker mirrors, springy seat, LSD in the back, H+L range gearbox, auto front hub lock, front and rear disk brakes, and a pretty sweet tape deck that works. I'm very impressed! Since it has such low kms, and the potential to be a pretty tough looking and going tourer and camping/hunting vehicle I reckon I'll keep it for a long time!
Keen to hear anyone's thoughts on these mods, and potential future hurdles and upgrades - particularly if you have any of these parts to sell local (I'm in Brisbane).
Photos to follow in subsequent post.
From what I've assessed the current job list is as follows:
Body
- New rims and tyres. Going to look for 265 75r16's, on either some sunnys or old style triton alloys.
- Steel bullbar and winch (should be getting one second hand this weekend)
- Full bush replacement front and back
- New springs and shocks
- Underguard paint and sound deaden
- Snorkel
- Full diff/gearbox/power steering/brake fluid change
- Diff/gearbox sandblast and repaint
- Brake caliper rebuild
- High mount diff/gearbox breathers
- Roof rack
- Rooftop tent
- Dual battery/12V electric system with dual voltage gauges, inverter, camping lights and air compressor
- UHF
- Remove rear seats
- Replace interior carpet and lay dynamat (or similar) through interior.
- Driveshaft boot replacement
- Gangster tint for the back windows
Engine
- Cam timing belt
- Get rid of the mechanical fan and go to 2x electric thermofans
- Fluid flush and change
- Aircon regas
- Fix heater blower
- New power steering pump (has a bent shaft - wtf??)
- New accessory belts
- New radiator hoses
Dream Mods
- Intercooler.
- 2.75" exhaust (for that sick JDM ricer rumble sound yo )
- Bigger camshaft
- Dyno tune
- OEM guard flares
- Replacing the 3 weird centre gauges with in style (matching-ish the main instruments) boost, oil pressure/temperature and water temperature
- Low coolant alarm
- Rear drawers/fridge slide
- Overhead console
- Gen 2 front caliper kit
- Repaint body
- Rock sliders with scrub bars to bullbar
- Interior cargo barrier
- Replace rear window seals
Its got some amazing features for a 1988 4x4; electric windows, power tailgate, cool gauges, two tone paint, huge trucker mirrors, springy seat, LSD in the back, H+L range gearbox, auto front hub lock, front and rear disk brakes, and a pretty sweet tape deck that works. I'm very impressed! Since it has such low kms, and the potential to be a pretty tough looking and going tourer and camping/hunting vehicle I reckon I'll keep it for a long time!
Keen to hear anyone's thoughts on these mods, and potential future hurdles and upgrades - particularly if you have any of these parts to sell local (I'm in Brisbane).
Photos to follow in subsequent post.
Comment