View Single Post
  #6  
Old 4 Weeks Ago
knigit knigit is offline
Junior Member
 
Join Date: Jul 2019
Location: Perth
Posts: 4
Default

Thank you for that. I had only ever dealt with gear linkages before, so lifting those gear levers out without knowing how they attached inside was a bit of a worry.



$30 dollars for the tiny little rubber spring cover, and $50 for the clutch fork boot what a rip off from MM!


Anyway slowly and steadily I managed to get the box out on a trolley jack and a cradle. Was quite a squeeze.



After finding the main harness clip in the cab it all became significantly easier, was really scratching my head on how to undo all those 20 year old electric connectors way up on top of the box.


Only had to disconnect oxygen sensor, earth wire, speedo sensor and one near the flywheel.



I just put a couple of cardboard gaskets over the gear lever holes to keep any dirt out.



Cheers
Reply With Quote