View Single Post
Old 16-08-19
amec amec is offline
Valued Member
Join Date: Mar 2015
Location: Wamberal
Posts: 619

Find out the amp draw and then see if you can get a switch that can handle the required current..
If the required current is too high, use a relay.
A decent multimeter will give you the info you need, or even any documents supplied with the lights might help.
PC Challenger. TJM bar and winch. Dual battery with Redarc dc-dc, Redarc trailer brake controller. USB outlets everywhere, Uniden UH5060 UHF, $0.45 EGR mod. Lovells springs and Bilstein shocks For 50mm lift. LED spotties. MM 4X4 Automate. Airtec snorkel, Hancook dynapro, Bushskinz skid plates x3 + side steps.Torqit peddle thing. Torqit Power Module.
Reply With Quote