Below Nav Bar

Collapse

Gen 4 only - 17" Factory Alloys vs Factory Steels Weight only

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • HeavyPizzaz
    Valued Member
    • May 2017
    • 807
    • Sydney

    Gen 4 only - 17" Factory Alloys vs Factory Steels Weight only

    Hey guys, just looking for feedback from somebody who has done a swap, researched it or weighed them.

    How much heavier can I expect the 17 x 7.5 factory steelies to be over the same size factory alloys which have come on the GLXs. Any hard numbers floating around?

    Many thanks.
  • sharkcaver
    "2000"+ Valued Contributor
    • May 2009
    • 6270
    • Perth

    #2
    see post 8

    MY16 NX GLX5 with just a few bits added. MY14 D-max spacecab, also with a few bits added.

    My Journeys

    Comment

    • Ian H
      Valued Member
      • May 2015
      • 2502
      • Melbourne

      #3
      I've got a 17" set of steels with BFG KO2s and also the 18" allotys with road types on them. The difference was negligible when I weighed them a couple of years ago, I think from memory about 1 kg.
      2015 NX GLS, Factory alloy bar, Kings HD Springs & Koni Shocks with 50mm lift, MM Auto Mate, Paddle shift kit, dual batteries with Redarc DC/DC, LRA 58L tank, Safari snorkel, Boo's bash plates (full set), 17" steels with BFG KO2's, Drifta drawers with slide, TPMS, Uniden UH8080S, Alpine iLX-702D head unit.

      Comment

      • HeavyPizzaz
        Valued Member
        • May 2017
        • 807
        • Sydney

        #4
        Awesome, many thanks to both of you.

        Comment

        Matched content

        Collapse
        Working...
        X