Does anyone know how to go about upgrading the ball weight specs on an existing towbar?
I have a 1998 NL 3.5l auto lwb with a Hayman Reese heavy duty tow bar fitted. The bar has a 50x50 hitch connection but no compliance plate on it. Probably worn off with time.
There is a sticker on the inside of the drivers door showing tow capacity of 2500 kg and ball weight of 120 kg.
Problem is my van is 1640kg gross with a ball weight of 135kg. I can’t get it any lower unless I rip out the oven in the kitchen, and I don’t need an earbashing from the better half.
I have a 1998 NL 3.5l auto lwb with a Hayman Reese heavy duty tow bar fitted. The bar has a 50x50 hitch connection but no compliance plate on it. Probably worn off with time.
There is a sticker on the inside of the drivers door showing tow capacity of 2500 kg and ball weight of 120 kg.
Problem is my van is 1640kg gross with a ball weight of 135kg. I can’t get it any lower unless I rip out the oven in the kitchen, and I don’t need an earbashing from the better half.
Comment