Thanks, was just scrolling thru the many pages! I do have factory rear locker and yes, would be great to be able to use it and TC . Pre wired would be great too thanks. I'll send a PM
Below Nav Bar Ad Module
Collapse
TC Patch Loom Mod
Collapse
X
-
Anyone here want one? Someone pulled out (has not been answering messages for a week) so there is an opening for one more buyer.
Cheers,
Vlad
Comment
-
-
Hi Vlad, congratulations for your works.
I follow Pajero 4WD Club of Victoria Public Forum from Italy, seems Australian Pajero owners have a lot of inventiveness , more of the European owners.
I have some questions for you, my Pajero il like the one in your avatar, it's a V98 with left drive handed.
It's a 2015 model, 3.2 Diesel 5 doors In style (it's the top model). I haven't found the manual to check if the diagram is the same of the right drive handed (I think it's the same).
You know if your patch loom works fine with European version of Pajero? If it's so, are you interested to send me one in Italy?
Thanks in advance , and enjoy the Pajero.
Sorry for my English.
Andrea
Comment
-
-
Originally posted by Andrea1968 View PostHi Vlad, congratulations for your works.
I follow Pajero 4WD Club of Victoria Public Forum from Italy, seems Australian Pajero owners have a lot of inventiveness , more of the European owners.
I have some questions for you, my Pajero il like the one in your avatar, it's a V98 with left drive handed.
It's a 2015 model, 3.2 Diesel 5 doors In style (it's the top model). I haven't found the manual to check if the diagram is the same of the right drive handed (I think it's the same).
You know if your patch loom works fine with European version of Pajero? If it's so, are you interested to send me one in Italy?
Thanks in advance , and enjoy the Pajero.
Sorry for my English.
Andrea
It should be the same. We based or info on the Russian service manual. I have also made one for a Swedish member and several middle-eastern members. I am happy to make one or you. You can find more info and latest pricing info on my Facebook group named Pajero Traction Control Mod Loom. I can make it pre-wired as well so let me know as soon as possible as I have already ordered switches for the pre-wiring.
Cheers,
Vlad
Comment
-
-
Hi Vlad, I purchased a loom from you nearly two years ago but not sure if this is tc on and tc off version. Any advice? In any case which wires are which? The device I have has four black wires and one blue wire. Tried to attach a pic but can't work out how.
Thanks for any information you can provide. Cheers.Attached Files2015 NX GLS with stuff added
Comment
-
-
Originally posted by DT6061 View PostHi Vlad, I purchased a loom from you nearly two years ago but not sure if this is tc on and tc off version. Any advice? In any case which wires are which? The device I have has four black wires and one blue wire. Tried to attach a pic but can't work out how.
Thanks for any information you can provide. Cheers.
The pair of black wire with the blue is for turning the TC off. The pair of black wires on their own is for turning the TC on.
There is no polarity in the relays so connect one of the black wires in each pair to ground and the other to switch power (one for switching TC on and one for switching TC off). Connect the blue to ground as well. Can connect all the ground wires to common ground.
Hope that helps. Can draw diagram for you if you want.
Comment
-
-
Originally posted by DT6061 View PostPerfect, thanks Vlad.
Comment
-
-
Originally posted by vladguan View PostAnyone here want one? Someone pulled out (has not been answering messages for a week) so there is an opening for one more buyer.
Cheers,
Vlad
Any chance that spot/opening is still available? If yes, I'd like to have:
- TC On/Off in 1 loom,
- 3 way rocker switch Mitsubishi look (if it's no trouble for you to get it), and
- express post to Melbourne.
Otherwise, please reserve 1 of the above sets for me the next time you're up for the next batch...
Cheers.
Tuckyin2015 NX GLX - 2" Lift, XHD Lovells Springs + Bilsteins, ARB Bar, Lightforce 170 Spotties, TJM 9500lb Winch, Hankook Dynapro ATM RF10 265/70R17 on 17" factory steelies, Uniden UHF, Boo's Bashplates.. more coming!
1992 3.0V6 NH GLS - GONE!! The King is dead!! Long Live the King!!
Comment
-
-
Originally posted by pajrex1456 View PostHi Vlad,
Any chance that spot/opening is still available? If yes, I'd like to have:
- TC On/Off in 1 loom,
- 3 way rocker switch Mitsubishi look (if it's no trouble for you to get it), and
- express post to Melbourne.
Otherwise, please reserve 1 of the above sets for me the next time you're up for the next batch...
Cheers.
Tuckyin
Comment
-
-
Originally posted by vladguan View PostI have already ordered parts for the current batch. Will let you know when I do the next batch.
Cheers.2015 NX GLX - 2" Lift, XHD Lovells Springs + Bilsteins, ARB Bar, Lightforce 170 Spotties, TJM 9500lb Winch, Hankook Dynapro ATM RF10 265/70R17 on 17" factory steelies, Uniden UHF, Boo's Bashplates.. more coming!
1992 3.0V6 NH GLS - GONE!! The King is dead!! Long Live the King!!
Comment
-
-
TC Patch Loom Moc
Hi Vlad,
I will be interested in one when you do the next batch.
RegardsNX GLS MY16 Auto: TJM Bull Bar | Paddlle Shift & P-Mate | MMTowbar | Spare Lift Kit | SPVi Module | Torque Pro App | Motorola UHF | Icom IC7000 HF | Rhino Rack Pioneer Platform | Boo’s Bash Plate complete set | PX07 Boss Air Compressor | Lightbar | SC-80 & AGM 100A rear seat well | Bonnet struts | Custom built Drawer & Fridge slide.
Comment
-
-
Originally posted by Satman View PostHi Vlad,
I will be interested in one when you do the next batch.
Regards
Comment
-
Matched content
Collapse
Comment