Mitsubishi dealer has quoted me $1270 to do a manifold clean and valve adjustment. 2012 Diesel 3.2L NW. Sounds awfully expensive. Any recent experience from anyone?
Below Nav Bar Ad Module
Collapse
Manifold clean
Collapse
X
-
Originally posted by Roypock58 View PostMitsubishi dealer has quoted me $1270 to do a manifold clean and valve adjustment. 2012 Diesel 3.2L NW. Sounds awfully expensive. Any recent experience from anyone?
Couple of links......
Dicko. FNQ
2014 NW with all the usual stuff plus more.
TIME....1000 times more valuable than money
-
-
Just paid $750 for a 150km service with tappet adjustment and manifold clean. Not sure if it was supposed to get the brake fluid flushed at that service but it didn’t include that.
The manifold was very clogged as I expected, not the worst he has seen but bad. I would post some photos but don’t know how.NW Exceed
Comment
-
-
Soda blasting the manifold?
I know abrasive and sandblasting will damage the gasket surfaces, but does anyone know if soda blasting the inside of the manifold? I didn't think that would damage the gasket surfaces because it doesn't hurt the glass or chrome on a car?NW 2012 Pajero Exceed 3.2 Diesel, 18" Goodyear Wrangler Duratracs offroad / Coopers Discoverers onroad; 66 Mustang Convertible; Suzuki M109R 1800, DR650 Dirt bike.
Comment
-
-
Originally posted by carnut1100 View PostSoda blasting should be fine.
Oven cleaner works nicely too...NW 2012 Pajero Exceed 3.2 Diesel, 18" Goodyear Wrangler Duratracs offroad / Coopers Discoverers onroad; 66 Mustang Convertible; Suzuki M109R 1800, DR650 Dirt bike.
Comment
-
-
Originally posted by Edzhere View PostThat's good to know, I have a soda blaster 10 minutes away. My car has 230k on it and not sure when/if manifold was ever done but be interesting to see what it looks like when I pull it apart. No egr delete or catch can but I will fit them. All highway miles, car is a one owner that did long trips to Perth 2 times a week, an 850 k round trip with a 30,000 km a year average. The hot highway running would be good for it compared to a car that did city miles.
I had the manifold cleaned after owning it for 8 months at 125,000 and the mechanic said it was well worth doing
Comment
-
-
valve adjustment
Originally posted by Roypock58 View PostMitsubishi dealer has quoted me $1270 to do a manifold clean and valve adjustment. 2012 Diesel 3.2L NW. Sounds awfully expensive. Any recent experience from anyone?
When I questioned the price they said the seals on the injector pipes were perished and they could only get a kit which was $300.
Regards.2013 Pajero GLX-R auto Diesel.
Tough dog 40mm raised suspension,ARB shocks,MCC bull bar,electric winch,bash plates,draws , engel fridge,dual batteries,air comp,water tank and electric pump,inverter,DC/DC charger,air bags, converter lock up system,diff/traction control modification.
Comment
-
-
Originally posted by pajaj70 View PostRhiatech Automotive in Bayswater should be able to help you out. They have performed a full valve clearance adjustment for me, I was happy with there service._________________
2016 NX Pajero GLX with:MCC Falcon Bull Bar, Dual Battery in rear storage, 30" Slim line light bar, Mungji EGR Delete
Wish list: +50mm suspension, Hankook Dynapro ATM 265/65/R18, Bushkinz Underbody protection, Boo Rear bar
Comment
-
Matched content
Collapse
Comment