View Single Post
Old 12-07-15
Ashley Ashley is offline
Join Date: Apr 2008
Location: Perth
Posts: 140

Thanks for the info.
I just used it to connect a camera to my nt.
I didn't have a camera but all the wiring was there.

On mine I used the 4th and 5th wire on the top row and the 2nd and 5th in the bottom row.

The 5th wires in top row and bottom row went to the camera signal
The 2nd wire bottom row was 12v on reverse power signal and 4th wire top row was power to the camera.

I bridged the 12v in and the camera power feed wires and also ran this to the radio.

The signal wires change colour at the back.
Pink for power at both ends. White for one signal and the other wire which was light green at the front went to the brown at the back.

Reply With Quote