View Single Post
  #23  
Old 10-10-19
Fbo974 Fbo974 is offline
Junior Member
 
Join Date: Apr 2019
Location: Reunion Island
Posts: 34
Default

Quote:
Originally Posted by NFT5 View Post
Yes. Take your switching feed from the high beam at either the headlight or at the relay box, run to the 85 contact on the relay then out via 86 to your switch inside.


This way your LEDs will only work when the high beam is on, or, by turning off the switch, you can have high beams without the LEDs.
Reply With Quote