View Single Post
  #22  
Old 29-09-19
NFT5's Avatar
NFT5 NFT5 is offline
Valued Member
 
Join Date: Apr 2011
Location: Canberra
Posts: 1,133
Default

Quote:
Originally Posted by Fbo974 View Post
But , i do that , the led bar will work only with the switch , if i want it to work with hibeam on , i need to take a positive from the headlight , right ?

Yes. Take your switching feed from the high beam at either the headlight or at the relay box, run to the 85 contact on the relay then out via 86 to your switch inside.


This way your LEDs will only work when the high beam is on, or, by turning off the switch, you can have high beams without the LEDs.
__________________
Chris
Reply With Quote