Sticky idea

[Herman4x4]

G'day,
Had it been thought of before in each generation of pajero have a sticky with part numbers in?
Cheers
Andrew.

Sent from my D6653 using Tapatalk

[TC.Barky]

Not a bad thought, we'd probably put it in the FAQ section though if anywhere to avoid cluttering up the main sections.

If you're happy to write it up or point us to an existing location be happy to put it up.

[Herman4x4]

Ok, will see what I can come up with.

Sent from my D6653 using Tapatalk

[Herman4x4]

I have a bit of a list of part numbers I have used or been able to find, but I am not able to post in the FAQ. Be good to keep it as a live type link so other forum members can add in to it.
Regards,
Andrew.

[Herman4x4]

Made a start

OK, I have made a start. Geoff sent me an excel file he had so I have combined the two, thanks for your input, you have a good list of part numbers. I have used separate tabs for each generation, and another tab with links to parts suppliers (if this is OK)
I have tries to load it but doesn't look like excel files are able to be loaded.
Would admin be able to load it as I think excel would be better than word as we can keep a tab per generation?
Cheers,
Andrew.

[Pickle]

Should be right now Andrew .
Dave

[Herman4x4]

Thanks Dave, I will give it a go.
Cheers,
Andrew.

[Herman4x4]

Here is what I have so far.
Regards,
Andrew.

[TC.Barky]

other option is a google doc spreadsheet. That way we could just link to it once and then just the spreadsheet needs to be updated rather than wherever the link ends up as I'm sure people will share around the file

[Herman4x4]

That's an idea. I guess there should also be some sort of disclaimer as well about all in good faith and the pajero club and forum are not accountable is the numbers are wrong or change??

Sent from my D6653 using Tapatalk

[GHendo]

Andrew, all I am getting in that spreadsheet is the two URL's at the top. Is there supposed to be a list of part nos ?

If Excel files are a problem, you could turn it into a PDF before uploading it.

Cheers

Geoff

[grhyso]

I use google sheets at the moment but find it is fairly limited compared to Excel. Another option would be dropbox.

If you would like some part numbers from the NT I will go through some receipts and old posts to find some of mine? Noteable parts off the top of my head would be Sway bar links, sway bar bushes, MM cargo barrier fit kit (for if you buy a second hand barrier or moving a barrier from one car to a new one).

[sharkcaver]

v-belt sets would be handy. I have upper/lower hose #'s if required.

[Herman4x4]

Send through and part numbers you have and I will add them in.

Geoff, not sure why you are only seeing the first sheet, I get all when I open it here at work. I use Office2016.

Will have a look at other options mentioned of the file type/storage.

Regards,
Andrew.

[GHendo]

Geoff, not sure why you are only seeing the first sheet, I get all when I open it here at work. I use Office2016.
Regards,
Andrew.

Errr, yes .... well um ... I knew there was more than one sheet ...

I've got my head out of my bum now


Geoff