Below Nav Bar

Collapse

Sensor mystery

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wiles
    Junior Member
    • Nov 2015
    • 3
    • sydney
    #1

    Sensor mystery

    Hi Guys,
    I have a 1997 NL 3.5 V6 auto pajero & I am hoping someone can tell me what the connector, with one black wire & one black/white wire that is connected to a 25mm square x 10mm thick black sensor, that is located directly behind the coolant temperature sensor(at the very front of the engine) is for.
    Cheers
    Tags: None
  • stumagoo
    Valued Member
    • Jun 2014
    • 2064
    • Perth WA S.O.R
    #2
    It's a noise suppressor for your radio and ecu etc. Stops rf interference from the coils
    1994 NJ 3.0 now with a 2000NL 3.5 engine and driveline, 2.5 catback, 32" MT Deegan 38's, 1" body lift, front diff drop with front tension rods indexed and cranked an 3", 3" on the rear coils
    *** retired to the big wrecking yard in the sky***
    1998 NL 3.5 blisterside, running a 6g75 (3.8) with M90 supercharger at 14psi, 305.70.16's on -44 rims 3.5" suspension lift, Custom Bull bar, winch install, custom front control arms, NJ GLS flares and some camping gear in the back
    .

    Comment

    • disco stu
      Valued Member
      • Dec 2018
      • 3106
      • Wollongong
      #3
      I remember being puzzled and googling part numbers off that myself

      Comment

      • wiles
        Junior Member
        • Nov 2015
        • 3
        • sydney
        #4
        sensor mystery

        Thanks Guys.

        I thought it was a noise suppressor but when I went to the dealer to get one they said that they don't have suppressor anymore. I then asked what it was & they were unable to tell me.

        Anyway, problem solved. Cheers.

        Comment

        Previous template Next

        Matched content

        Collapse
        Working...
        X