Below Nav Bar Ad Module

Collapse

Nl exceed ignition replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • elXR8sleeper
    Junior Member
    • Dec 2014
    • 4
    • Cowra

    Nl exceed ignition replacement

    Nl exceed ignition replacement
    I am picking up another nl exceed next week but the guy has sold the ignition barrel
    Is all that is required to start and bring her back home just another key and barrel or will i need to take a matching computer key and barrel with me thanks in advance
  • stumagoo
    Valued Member
    • Jun 2014
    • 2064
    • Perth WA S.O.R

    #2
    key needs to match the immobliser module. this unit is attached to the outside of the centre console above the clutch pedal and looks like



    I have heard that some locksmiths can code a blank key but I have no experience with that myself

    Traditionally mitsi code the immobiliser to the ecu and they need to be bought as a set. However in the NL case this is not done and we can get away with just the immobiliser.
    1994 NJ 3.0 now with a 2000NL 3.5 engine and driveline, 2.5 catback, 32" MT Deegan 38's, 1" body lift, front diff drop with front tension rods indexed and cranked an 3", 3" on the rear coils
    *** retired to the big wrecking yard in the sky***
    1998 NL 3.5 blisterside, running a 6g75 (3.8) with M90 supercharger at 14psi, 305.70.16's on -44 rims 3.5" suspension lift, Custom Bull bar, winch install, custom front control arms, NJ GLS flares and some camping gear in the back
    .

    Comment

    • elXR8sleeper
      Junior Member
      • Dec 2014
      • 4
      • Cowra

      #3
      Thank you

      Comment

      Matched content

      Collapse
      Working...
      X