OK, might as well have a thread on my ride.
Car is a MY15 NX Pajero GLS in Graphite Metallic colour with 3.2L I4 DiD and 5Spd Tiptronic Auto.
Mods to date:
Car is a MY15 NX Pajero GLS in Graphite Metallic colour with 3.2L I4 DiD and 5Spd Tiptronic Auto.
Mods to date:
- Clear tint over privacy glass (kids don't complain like they do in the wife's Outlander with privacy glass but no clear tint to stop UV).
- 20% tint on front door windows.
- 5x CSP festoon interior LEDs.
- 4x 5630SMD T10 puddle LEDs.
- 2x 5050SMD fuse type vanity mirror LEDs.
- 2x 5630SMD T10 approach LEDs.
- 2x 5630SMD T10 rear number plate LEDs.
- Dealer fit blue LED sidestep lights.
- 3000kg ATB towbar (dealer recommended ATB towbar as it does not require the spare tyre lift kit and it protects the rear bumper scoop from damage).
- Steelmate front parking sensors with in-dash Air-on-Board factory look custom symbol isolation switch. Can be caliberated to handle nudge bars.
- Compass module from a wrecker.
- Hella Sharptone horns
- DEI 506T glass breakage sensor.
- DEI 507M tilt sensor.
- Additional alarm horns.
- Bushskinz intercooler, sump and transmission/transfer case guards.
- Genuine NW polished alloy nudge bar.
- Traction control on/off mod.
- 21.5" 223W STEDI ST3303 savage LED light bar.
- 25W Maxi Trac rear work light on a pole (doubles as sand flag pole) with spare wheel pushed out using 6mm wheel spacer.
- Relays and circuit breakers for above two lights in custom box.
- Careud valve type TMPS with display in switch panel.
- Carling switch panel with TPMS, TC On/Off button, rear work light button, UHF RJ45 jack, USB and voltmeter, LED light switch and air compressor button.
- Paddle shift.
- SPV EGR module.
- Donaldson P551615 3 micron secondary filter.
- ProVent 200 catch can.
- OCAM 2.5mx3.0m Awning with SS brackets and anti-theft bolts.
- 2" lift with Dobinsons 50-80kg front springs and 0-100kg rear springs with MRR shocks.
- Bonnet struts.
- Chrome door handle protectors.
- ARB CKMA12 air compressor in engine bay
- Unicorn direct replacement bar and plate type intercooler.
- Rola Titan 1800x1200 flat rack on Prorack s46 crossbars.
- 17x7.5" +38 Challenger wheels with 265/70R17 tyres.
- Blackvue dr900s front dash cam and mini 0826 rear dash cam.
- DIY recovery track mount on roof rack.
- DIY fishing rod holder on roof rack.
- Fit Uniden 5060.
Comment