Below Nav Bar Ad Module
Collapse
User Profile
Collapse
-
You could splice in and add resistors in parallel with all the bulbs if you know what you are doing. Or return them/ bin them....
-
-
-
-
If that's intake pre-turbo and that reading is actually correct then that's a major major issue.
If that's actually in the intake post-turbo, I don't know what's normal, but seems high just based on previous experience I've had with turbo...
-
👍 1
Leave a comment:
-
-
Heavy going in rough terrain, in an auto in low range.
Very likely just to be excess heat from the transmission causing it.
Had the same symptoms in an automatic Terracan (loosely related to early Pajeros)
All that excess...
-
👍 1
Leave a comment:
-
-
Anyone actually done a lens replacement? I’d be happy to attempt it but just wondering if anyone has actually used the Aliexpress or similar lenses....
Leave a comment:
-
-
If you know it’s out (like 99.9% of cars on the road) then just drive to suit. I mean you already know by the sound of it that your GPS shows pretty much the exact speed so why do you need the speedo to be correct? Just playing devil’s advocate ...
Leave a comment:
-
-
Lovely. What a beauty. My NW in the meantime is lucky to be washed every 2 months... Enjoy it, it's a ripper...
Leave a comment:
-
-
-
Mine is a Digimarker brand. Looks like they are closer to $500 now unfortunately, mine (orange label w. Bluetooth) seems to be not available anymore.
https://www.digimarker.us/...
Leave a comment:
-
-
Ah too late for ozdave, but for less than $400 you can get a non slimline 120Ah Lithium battery, with built in Bluetooth enabled BMS. I have one in the 3rd row area under the floor. Around 1/3 the price for same thing, I think for around the $420 mark...
Leave a comment:
-
-
-
-
So dangerous, very ill-advised or probably downright illegal even if there were no airbags. Sharp metal things poking out everywhere? Not a great idea....
Leave a comment:
-
-
It it an easier option to just run another wire along the same route that the high current wires (wire) go to the front? The one that feeds the actual DC/DC input?
Leave a comment:
-
-
My DC/DC unit works just fine without a trigger wire. Usually they sense the input voltage and operate accordingly, sense wire just is extra insurance. Worth a thought anyway....
Leave a comment:
-
-
Anyone attempted the cover replacement? I guess you heat up around the edges to soften the sealant then remove and replace?
Leave a comment:
-
-
Wow now you say about being quieter I think I agree. Was cruising along the other day enjoying my nice cooler air and I did think the car is running nice and quiet! (I do have Dynamat in all front doors and some along transmission tunnel and back area...
Leave a comment:
-
No activity results to display
Show More
Leave a comment: