View Full Version : Replacing Speedo

13-08-08, 09:26 PM
Ive got a 1990 NG that needs the speedometer replaced can anyone advise how to remove the housing that contains the speedo, tacko and fuel gauge from the dashboard assembly.
Im able to remove the front screws but something at the rear of the unit prevents me from lifting it away from the dashboard.

15-08-08, 10:53 PM
It should have a cover piece you have to lift off on top, then take a screw out of the back housing. You can see it if you look down through the windscreen to get the screw driver onto it.

Assuming mitsy didn't change it from the old NA/B's.;)

16-08-08, 03:23 PM
you may have to undo by hand the speed drive that goes into the back of speedo.