really need an engine bay pic for challenger!

[jamesb]

hey guys need a photo asap of an 2000 onwards challenger engine bay.
needs to be looking down directly above the engine and i need to be able to see the right hand side(passenger side) chassis rail.its fairly easy to see,the part of the rail closest to the front of the car so not too hard.

if someone could help out that would be awesome!had a lil bingle and just checkin its not twisted/bent!!!

thanks alot,
james

[Pickle]

Best I can do for you bud. Although the dual batteries don't help. A couple from underneath.
Dave

[jamesb]

damn.ur dual batt is sittin just on top off what i wanna see!argh!and i cant see it thru the bottom.
it may be a engine mount rail....

but thanks alot for tryin dave!
much appreciated!

anyone else?

[jamesb]

actually dave!
can u take a pic a little further down please?like just of the bar i have bodgily circled and arrowed?please please!thats the bit i want!

if you could show the section after the yellow battery that would be awesome!
sorry for the dodgy explanations ahah my car isnt here to look at!

its the big rectangle piece of metal the engine sits on.roughly lol.

[Pickle]

Best I can do for you! As you can see there is not a lot of room around that area.
Dave

[900canoes]

Does this help?

[jamesb]

k cheers dave!but nah i still cant see!

900canoes,thats perfect-but-i just need to see a little further down!just where the gusset-bit is!im hoping it will curve slightly out???as mine does.....justa lil more towards the bonnet.

thanks heaps guys!
almost there!
james

[jamesb]

ORRR
can someone tell me,
do the chassis rails kinda look like this dodgey pic-ie:follow the same sort of lines?

i really do hope so
edit: put simply,should the right hand chassis rail under the bonnet be straight all the way or not?or do they have a curve where they pass the engine block?

[900canoes]

Cant see your pic jamesb, here are a couple more of mine. The rail does start to widen out just behind the gusset. (the camera is a bit too fat to get much closer.)

[jamesb]

argh this is killin me!

im a knob 900 haha i need to see just a little further back now but im not sure.

wish the car was here just to look at.its too hard guessing and stuff.

you see wher the big bolt comes out of the rail?(as seen best in ur 3rd pic above)i cant tell if your chassis rail around that area is slighlty curved away from the engine.this is where mine is curved. i jnust cant see from the pics

thanks alot guys.ur awesome
james

[900canoes]

OooooKaaayyyyy, I had another gander. Yes the rail does appear to curve away with the bolt being in about the centre of the curve.

[jamesb]

thanks heaps guys!

its all goooood.the rail is fine.

im happy