Rear work light carrier thingy.

[m1s3ry]

So out of boredom i made this, not that i really need it, i just thought it might be cool . It holds a work light, GPS antenna and UHF antenna. Well the real reason i made it was so i didn't have to keep closing the GPS antenna cable in the door as it was mounted on the roof rack.

If you don't look closely, you won't see the bad welds and the bad painting


Test fitting.


Running cables through door.



Running cables through factory rubber thing.


Final product fitted with a 31" spare.


Now all that needs to be done is run the cables through the car and reconnect them

[Pickle]

I think all the lights on the back are catching up to how many you have on the front. Good job though. Does it get any speed wobbles?
Dave

[m1s3ry]

I think all the lights on the back are catching up to how many you have on the front. Good job though. Does it get any speed wobbles?
Dave

Almost, there's only 275 watts on the back .. Seems to be pretty solid, but we'll see how it goes over the next few weeks.

[redpaj]

Looks good Steele now we have to go for a night drive to test all your lights out

[pagerow]

That's really clever mis3ry. Are the cables a tight fit in the grommets through the back door? Did you coat the holes with anything to prevent rust?

[m1s3ry]

That's really clever mis3ry. Are the cables a tight fit in the grommets through the back door? Did you coat the holes with anything to prevent rust?

Thanks, it is a pretty tight fit and the holes had a tiny bit of kill-rust paint put on them..